SKF TKBA 21 Instrucciones De Uso página 20

11. Belt tension tester
Designation
PHG PT/C1 008
PHG PT/C1 009
PHG PT/C1 010
TKBA 31-CB
11.1 Instructions
1. Select the appropriate tester from the tables.
2. With the indicator arm down, place the tester
parallel to the side of one belt along the
midsection of the span length.
3. Holding the rubber finger loop, apply pressure
directly downwards.
18 EN
Description
Tension tester I 15 kg – 70 kg (30 lb – 150 lb)
Tension tester II 50 kg – 150 kgn (100 lb – 300 lb)
Tension tester III 150 kg – 300 kg (300 lb – 700 lb)
Toolcase with inlay for TKBA 21 & 31
Rubber finger loop
Indicator arm
Scale
Indicator arm crosses the scale
4. Stop when you feel and hear the "click".
5. Remove the tester and read the belt tension by
observing the point where the top surface of the
indicator arm crosses the numbered scale on
the tester body. (See picture)