Idiomas disponibles
Idiomas disponibles
depending on the riding position and the resulting wrist angle.
You can set the button assignment individually, see "Settings"
[p. 29].
Mounting options
The TE1 gear lever is designed for mounting on the right-hand
side of the handlebar.
● Instead of the Pinion clamp, the TE1 can also be
connected with combination clamps from other
manufacturers. (e.g. Magura ShiftMix 3, SRAM MMX)
● The cable must be fixed to the underside of the handlebar
in such a way that the adjustability of the gear levers is
guaranteed, without sharply bending the cable or putting
it under tension.
● Make sure that there is no collision with the gear levers
and other components (especially the brake) also when
operating them.
Adjustability
To ensure optimal accessibility of the gear levers, for all hand
sizes and preferences, a wide range of adjustment options can
be selected.
● The TE1 should be positioned on the handlebars in such a
way that you do not have to remove your right hand from
the grip to reach both gear levers with your thumb.
● For optimum accessibility, the clamp can be positioned to
the left or right of the brake lever. Fine adjustments can
be made via the two screw-on points on the TE1.
● You can also change the button assignment of the TE1 in
the settings of your e-bike.
25
