Checking The Connectors - GRASS sensotronic Manual De Instrucciones

Grass Sensotronic
Fig. 5:
Removing the drawer
WARNING
Fig. 6:
Correct fit of the connectors
Fig. 7:
Fitting the drawer
30

5.2 Checking the connectors

The connectors of the "Grass Sensotronic" drawer system are located at the back of
each carcass.
In case of a malfunction of the drawers, check the connectors of the system before
informing an authorized expert.
Proceed as follows:
Live components!
Electric shock
Defect of the drive
» Disconnect the power unit from the mains before checking the
connectors.
» Do not insert metallic objects into the power unit.
» Disconnect the power unit from the mains.
» Remove the contents of the drawer.
» Remove the drawers, see figure 5.
» Check the connectors at the back of the carcass for correct fit,
see figure 6.
» Insert the drawers and close them see figure 7.
Make sure the drawers engage correctly (CLICK).
» Activate the power supply and wait for the drawers to adjust.
» Check if the drawer system functions correctly:
Briefly touch any drawer.
» In case of a malfunction, please inform an authorized expert.