3. SETTING UP THE COFFEE MAKER
3.1 Selecting the temperature
Coffee temperature can be adjusted to suit your preference. While the coffee maker is plu-
gged in, proceed as indicated below:
1. If the coffee maker is switched on, touch the power icon (a) to switch it off. All the indi-
cators will go off.
2. Touch the water quantity adjustment icon (g) for 3-5 seconds.
A beep will be heard and the indicator will light up showing preselected temperature level.
3. Touch the icon (g) repeatedly for changing water temperature. Indicators will light up
successively with each touch. Once selected, this value will be saved automatically.
Minimum: 90 ºC / Medium 98ºC / Maximum 105ºC
Minimum
3.2 Selecting water hardness
Water hardness can be selected to be adapted to the characteristics of the water in your
area. You can inquire about the water hardness with your local water supplier, or use test
strips to determine it.
Test strips are supplied depending on the model or may be purchased from after sales
service or specialist shops (see section "Accessories").
If test strips are used:
-
Immerse the test strip in tap water for 2-5 seconds.
-
Wait for 1 minute. The number of stripes that turn red indicate the water hardness.
Very soft
Soft
Medium
Hard
Very hard
1. If the coffee maker is switched on, touch the power icon (a) to switch it off. All the indi-
cators will go off.
Medium
Maximum
55
