Medisana Ultrabreeze Instrucciones De Manejo página 17

60050_GA_Ultrabreeze_West_NEUSS.qxd:Luftbefeuchter
3.5
Illumination
3.6
Setting the
convenience
functions
Setting
the time
symbol for the air humidifier
switch off the device. The unit's automatic cut-off feature ensures that the fan
and nebulizer are automatically switched off when the water reservoir is empty.
Operating time:
Level 1 when filled with 1,3 litres of water: approx. 20 hours.
Level 2 when filled with 1,3 litres of water: approx. 30 hours.
The water tank in the MEDISANA Intensive Personal Humidifier Ultrabreeze
features an internal illumination unit that can be activated with a simple press
of the LIGHT button . The symbol for lighting
blue light appears. Press the button
press the button a third time and a green light appears. Press the LIGHT but-
ton a fourth time and the three colours (blue/red/green) change one after
the other at intervals of 10 seconds. Two colours light up at the same time
when they are changing. Press the button
a certain time of day:
Midnight - 8 am - green light
8 am - 4 pm - red light
4 pm - midnight - blue light
Press the LIGHT button
lighting symbol disappears.
The lighting can be used independently from the nebulizer and the fan, such
as for night illumination.
When the unit switches off automatically, the illumination remains on. The
intensity of the light decreases when the nebulizer is activated.
Your MEDISANA Intensive Personal Humidifier Ultrabreeze has three convenient
features: a clock display, an integrated clock timer and an alarm function.
Set the current time, to use the Ultrabreeze as a regular clock and as an alarm
clock with the alarm function.
The integrated clock timer enables you to switch your personal humidifier on
and off automatically at a certain time.
Setting the clock and alarm time is done one after the other in one setting pro-
cedure. If you do not make any settings or you want to skip them, keep pressing
the SET button until you come to the next setting mode. The setting mode for
the alarm clock is shown by "ON" or "OFF" and for the alarm by
not press any button for 10 seconds during the setting procedure, the setting
mode ends.
Press the SET button once to get the setting mode for the clock. "00.00"
flashes in the display. Keep pressing the hours button
is displayed. Proceed in the same way for the minutes button
minutes.
14.09.2010 17:41 Uhr
3 Operating
flashes. Press the ON/OFF button
appears in the display. A
a second time and a red light appears,
a fifth time to select a colour for
a sixth time and the lighting switches off. The
Seite 13
GB
again to
. If you do
until the current hour
for setting the
13