Standard Accessories - HIKOKI CR 14DSL Instrucciones De Manejo

8. Do not put or subject the battery to high
temperatures or high pressure such as into a
microwave oven, dryer, or high pressure container.
9. Keep away from fire immediately when leakage
or foul odor are detected.
10. Do not use in a location where strong static
electricity generates.
11. If there is battery leakage, foul odor, heat
generated, discolored or deformed, or in any way
appears abnormal during use, recharging or
storage, immediately remove it from the equipment
or battery charger, and stop use.
CAUTION
1. If liquid leaking from the battery gets into your
eyes, do not rub your eyes and wash them well
with fresh clean water such as tap water and
contact a doctor immediately.
If left untreated, the liquid may cause eye-problems.
SPECIFICATIONS
Power Tool
Model
No-Load Speed
Stroke
Capacity
Rechargeable battery
Weight
Charger
Model
Charging voltage
Weight

STANDARD ACCESSORIES

1 Charger ..................................... 1
2 Battery ...................................... 2
3 Battery cover ........................... 1
CR14DSL
4 Plastic case .............................. 1
CR18DSL
5 Hexagonal bar wrench .......... 1
6 Blade (No. 103) ...................... 1
CR14DSL 1 Blade (No. 103) ...................... 1
CR18DSL
2 Hexagonal bar wrench .......... 1
(NN)
Standard accessories are subject to change without
notice.
CR14DSL
BSL1430: Li-ion 14.4 V
(3.0 Ah, 8 cells)
3.3 kg
UC18YRSL UC18YFSL
14.4 V – 18 V
0.6 kg 0.5 kg
2. If liquid leaks onto your skin or clothes, wash well
with clean water such as tap water immediately.
There is a possibility that this can cause skin irritation.
3. If you find rust, foul odor, overheating, discolor,
deformation, and/or other irregularities when using
the battery for the first time, do not use and return
it to your supplier or vendor.
WARNING
If an electrically conductive foreign object enters the
terminals of the lithium ion battery, a short-circuit may
occur resulting in the risk of fire. Please observe the
following matters when storing the battery.
Do not place electrically conductive cuttings, nails,
steel wire, copper wire or other wire in the storage
case.
Either install the battery in the power tool or
store by securely pressing into the battery cover
until the ventilation holes are concealed to prevent
short-circuits (See Fig. 1).
0 – 2100 min -
28 mm
Mild Steel Pipe: O.D. 90 mm
Vinyl Chloride Pipe: O.D. 90 mm
Wood: Depth 90 mm
Mild Steel Plate: Thickness 10 mm
BSL1440: Li-ion 14.4 V BSL1830: Li-ion 18 V BSL1840: Li-ion 18 V BSL1850: Li-ion 18 V
(4.0 Ah, 8 cells) (3.0 Ah, 10 cells)
OPTIONAL ACCESSORIES (sold separately)
1. Battery
<BSL1430, BSL1440>
2. Blades
(1) No. 1 Blade
(2) No. 2 Blade
(3) No. 3 Blade
(4) No. 4 Blade
(5) No. 5 Blade
(6) No. 8 Blade
(7) No. 9 Blade
(8) No. 95 Blade
(9) No. 96 Blade
(10) No. 101 Blade
CR18DSL
1
(4.0 Ah, 10 cells) (5.0 Ah, 10 cells)
3.4 kg
<BSL1830, BSL1840, BSL1850>
(11) No. 102 Blade
(12) No. 103 Blade
(13) No. 104 Blade
(14) No. 105 Blade
(15) No. 106 Blade
(16) No. 107 Blade
(17) No. 108 Blade
(18) No. 121 Blade
(19) No. 131 Blade
(20) No. 132 Blade
English
10