Bosch Truvo Manual Original página 22

22 | English
Metal objects and live cables are automatically searched for during each
measurement.
Overview of indications:
(4)
(5)
Green –
Yellow ●
Illuminated ●
red
Illuminated –
red
Objects are only displayed roughly the first time you move over them. Move
the measuring tool several times over the same surface in order to locate the
object precisely.
The detection depth of the measurement depends on material and size of
the objects, as well as material and condition of the substrate and may be
less than the maximum detection depth.
1 609 92A 8B4 | (02.03.2023)
Always move the measuring tool in a straight line in a
lateral direction over the substrate, applying light
pressure, without lifting it off or changing the pres-
sure. Hold the measuring tool by the gripping
surface (1) with an even grip and do not touch the
sensor area (8) while taking measurements.
For the best possible results, make sure that the
measuring tool maintains contact with the surface
throughout the measuring process.
Audio Meaning
signal
(3)
– – No object is within the sensor
range
– – – Metal object near the sensor or
– Small or deep-lying metal object
is within the sensor range or
– Sensor interference due to the
unfavourable nature of the wall
– ● Metal object is within the sensor
range
● ● Live cable is within the sensor
range
Bosch Power Tools