Sunny Health & Fitness SF-E905 Manual Del Usuario página 16

Ocultar thumbs Ver también para SF-E905:

Idiomas disponibles

We value your experience using Sunny Health and Fitness products. For assistance with parts or

troubleshooting, please contact us at [email protected] or 1-877-90SUNNY (877-

907-8669).

STEP 4:

Secure the 2 Pedals (No. 27L/R) to the 2

Pedal Support Tubes (No. 18L/R)

respectively using 4 Hex Bolts (No. 28), 4

Flat Washers (No. 29) and 4 Nylon Nuts

(No. 30) using Spanner (No. 100).

CAUTION:

Both pedals are labeled; L for LEFT and R

for RIGHT.

STEP 5:

Remove the preassembled 2 Spring

Washers (No. 34) and 2 Hex Bolts (No. 35)

from the Handlebar Post (No. 9) using

Allen Wrench (No. 101). Attach Armrest

(No. 31) to the Handlebar Post (No. 9) in

place. Secure it with 2 Spring Washers (No.

34) and 2 Hex Bolts (No. 35) that were just

removed using Allen Wrench (No. 101),

and then pull the Pulse Sensor Wires (No.

46a/b) out of the Handlebar Post (No. 9).

Finally attach the Decorative Cover (No.

36) onto the Armrest (No. 31).

Attach the 2 Handlebars (No. 32L/R) on the

2 Swing Bars (No. 24L/R) with 4 Carriage

Bolts (No. 37), 4 Arc Washers (No. 14) and

4 Domed Nuts (No. 33) using Spanner (No.

99).

NOTE: If the Handlebars (No. 32L/R) rub

against the Armrest (No. 31) during the

workout please recheck if the Handlebars

(No. 32L/R) are assembled correctly. You

should attach Handlebars (No. 32L/R) to

Swing Bars (No. 24L/R) according to the

label marked with L or R.