URBANGLIDE RIDE 100 MAX Manual Original página 28

Displays the speed at which you are travelling
1
Switching on the front light: To do this, press the button briefly twice. To turn off, repeat the same operation.
2
Speed level: There are 4 speed modes (Walk mode, ECO/D/S), press the button 1 time to switch from one speed
3
mode to another.
Error message
4
Battery level
5
Button On/Off
6
Unfolding steps
1. To unfold the scooter, first put the scooter on straight and
then press the mudguard to release the hook, hold the chainring,
lift the handlebars to the stem position and close the
folding/unfolding latch.
Using the screen
Use of the button On/Off :
1. The battery indicator shows the remaining battery level in real
time.
2. To turn the scooter on, press and hold the On/Off button for 3
seconds. To turning off the scooter press 2 seconds.
3. Once the scooter is on, press the On/Off button twice to turn on
the front light. Press twice more to turn it off.
4. To change the speed modes "1, 2, 3 and walk mode" press the
On/Off button once.
- Speed 1: maximum speed of 4mph (6km/h)
- Speed 2: maximum speed of 10mph (15km/h)
- Speed 3: maximum speed of 16mph (25km/h)
- Walk mode : maximum speed of 2mph (3km/h)
5. To change the unit between km and mph, press the On/Off button
3 times.
10