TFA 60.2011 Instrucciones De Uso página 7

TFA_No_60.2011_Anl_09_23 05.09.2023 14:14 Uhr Seite 7
Digital alarm clock with room climate
• A brief beep will sound and all LCD segments will light up for about 2 seconds.
• The unit is now ready to use.
• The display remains dark.
• Press the LIGHT/SNZ button at the base or on the backside to activate the backlight for 10 seconds.
7. Operation
• The device will automatically quit the setting mode if no button is pressed within 10 seconds.
• Press and hold UP or DOWN button in the setting mode for fast running.
7.1 Setting of time
• Press and hold MODE button in normal mode for three seconds.
• The hour digit is flashing. Press UP or DOWN buttons to adjust the hours.
• Confirm the setting with MODE button.
• The minute digit is flashing. Press UP or DOWN buttons to adjust the minutes.
• Confirm with MODE button.
• Press UP button for 3 seconds in the time mode to choose 12 HR or 24 HR system.
• In 12 HR system PM appears after 12 o'clock on the display.
7.2 Setting of calendar
• Press MODE button.
• The month-(M) and day display (D) appear in the display.
12
• Press and hold MODE button for 3 seconds.
• The year digit is flashing. Press UP or DOWN buttons to adjust the year.
• Confirm the setting with MODE button.
• The month digit is flashing. Press UP or DOWN buttons to adjust the month.
• Confirm with MODE button.
• The day digit is flashing. Press UP or DOWN buttons to adjust the day.
• Confirm with MODE button.
• Press MODE button again to return to time mode.
7.3 Temperature display
• Press DOWN or °C/°F button to toggle between ° C or ° F as temperature unit.
7.4 Setting of alarm clock
• Press MODE button twice in time mode.
• appears on the display.
• Press and hold MODE button for 3 seconds.
• The hour digit and the alarm symbol are flashing. Press UP or DOWN buttons to adjust the hours.
• Confirm the setting with MODE button.
• The minute digit and the alarm symbol are flashing. Press UP or DOWN buttons to adjust the minutes.
• Confirm with MODE button.
• Press MODE button again to return to time mode.
• To activate the alarm press UP button.
Digital alarm clock with room climate
• The current time and the alarm symbol appear on the display.
• Press UP button again and the alarm is disabled.
• The alarm symbol disappears on the display.
• When the alarm rings (4 different, increasing alarm levels), the alarm symbol flashes.
• You can stop the alarm by pressing any button.
• You can activate the snooze function by pressing the LIGHT/SNZ button on the base or on the backside.
• The alarm symbol is flashing and the alarm will be interrupted for 8 minutes.
7.5 MAX/MIN function
• Press MAX/MIN button.
• MAX appears on the display. The highest temperature and humidity values appear on the display.
• Press MAX/MIN button again.
• MIN appears on the display. The lowest temperature and humidity values appear on the display.
• The MAX-MIN values are automatically reset at midnight.
• Press MAX/MIN button again to return to the actual display.
7.6 Comfort level
On the display appears a Smiley to indicate the comfort level.
DRY < 40%
☺
OPTIMAL INDOOR CLIMATE 40 - 70% 20 °C...26 °C
WET > 70%
No display 40 - 70% <20 °C, >26 °C
8. Battery replacement on battery operation
• Replace the batteries when the display becomes weak.
• Open the battery compartment and insert three new batteries 3 x 1,5 V AAA. Ensure battery polarity is correct.
9. Care and maintenance
• Clean it with a soft damp cloth. Do not use solvents or scouring agents. Protect from moisture.
• Remove the batteries and pull out the plug of the socket, if you do not use the product for a long period of time.
• Keep the device in a dry place.
10. Troubleshooting
Problems Solution
➜ Connect unit to mains adapter
No display
Battery operation:
➜ Ensure batteries polarity are correct
13