EFBE-SCHOTT OKB 920 D Manual página 12

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 35
SCOPE OF DELIVERY AND PACKAGING
First, check if the packaging is undamaged and complete. If any parts are missing, do not
use the device, but contact your retailer or service centre.
Package Contents
The device
Safety goggles
Instruction book
Packaging
The packaging is made of environmentally friendly raw materials. It is reusable or can be
returned to the raw material cycle. Properly dispose of unused packaging material.
Immediately report any shipping damage to the retailer.
Always keep packaging films out of the reach of children. There is a risk of suffocation!
OPERATION
Switch-on
Connect the tanning device to the mains supply. The display lights up briefly and
emits an acoustic signal before turning off automatically.
Press the On/Off button to light up the display, the field "USER" will flash.
Press the User button, the number "13" will flash: this is the recommended exposure
time of 13 minutes for the first exposure for skin type II users, as mentioned in the
tanning-session plan.
By pressing the User button again, the user display advances by one user.
The settings allow a maximum of 8 different users. If a user is selected again, the
exposure time of their previous tanning session will flash.
By pressing the "Up" button, you can increase the exposure time by 1 minute.
The maximum exposure time is 60 minutes.
By pressing the "Down" button, you can reduce the exposure time by 1 minute.
The minimum exposure time is 1 minute.
Press the On/Off button again to switch on the UVA lamp.
Note: If you do not press the On/Off button to switch on the UVA lamp within 5
minutes after setting the exposure time, the device will switch off automatically and
the previously set time will not be saved.
Once the timer has elapsed, the device switches off automatically.
You can also switch off the device at any time by pressing the On/Off button.
Do not exceed the recommended exposure time!
Never continuously expose to UV radiation!
Components and controls
The UVA lamp does not light when hot. For physical reasons, the UVA lamp requires a
starting and cooling time of approx. 5 minutes.
Exposure advice
Slightly turn your head to the left and to the right in order to ensure an even tanning.
The device can be used for tanning your face and other body areas.
Always wear the safety goggles during exposure to protect your eyes.
12
loading

Este manual también es adecuado para:

Sc okb 920