PRIXTON CENTURY Manual De Instrucciones página 13

USB/TF function
Turn the Function switch knob to the CD position, long press mode switch key [
/USB/T-
F/BT] to select USB/TF mode.
Insert your USB disk or TF card until "USB" or "TF" appear on the screen, USB or TF music
will begin automatically.
USB disk or TF card on device but under the other modes, long press mode switch key [
/USB/ TF/BT] 2 seconds to select USB or TF mode.
Long press and hold 2 seconds DEL key and short press again to delete the current
USB/TF music.
USB/TF recording
The device can directly record from Vinyl record/Cassette/CD/BT/AUX and convert songs to
digital format by USB or TF card.
Insert the USB disk or TF card.
Enter into PHONO/Cassette/CD/BT/AUX mode and play the music you want to record.
(Remark: Please make sure the AUX cable not connect when you want to record the
music from Cassette)
Press the REC key until "REC" appear on the screen. The record start while the "REC" is
flashing after several seconds.
Press the stop button [
] to stop the record, END will appear on the screen. The music
will save on USB disk or TF card.
Press the stop button [
] until "ONE" appear on the screen and press this button again
to stop the record under the CD mode.
Bluetooth function
Turn the Function switch knob to the CD position.
Long press mode switch key [
/USB/TF/BT] to select BT mode until "
" icon light up
and "BT" is flashing on the screen.
Make sure the available Bluetooth device into "pairing mode". Choose and click the
correct Bluetooth name to connect.
You will be heard the Connected once connect successful. Then the music can be
playback via Bluetooth.
Connect back to the available Bluetooth device
The connected Bluetooth device will connect back automatically when you back to the
workable area under the BT mode.
Long press the PLAY/PAUSE button [▶ǁ] 6 seconds the current connected Bluetooth
device will disconnect. Long press the PLAY/PAUSE button [▶ǁ] 6 seconds again, it will
connect back if no pairing update.
FM/AM function
Turn the Function knob to the RADIO position.
Toggle [FM/AM] wave changing switch to select FM or AM radio.
Left/ Right rotate the TUNING knob to tune the radio station.
Extend and move the FM antenna to obtain the best reception.
Turn the Function knob to AUX/TAPE position
Insert the cassette into the cassette slot correctly
Push the cassette slightly, it will slide into place and begin playback automatically.
Push the [Cassette eject/ Fast forward] button will fast forward the cassette.To resume
normal playback, push the button again.
13
loading