16-Repeat/Program key (Short press to switch the single repeat/ folder repeat/ entire CD
repeat under the CD/USB/TF mode)
17-Record/Delete (Short press start recording from CD/Phono/Radio/BT/TAPE/AUX; Long
press and hold 2 second to delete the current USB/TF music)
18-Stop/USB/TF/BT mode selection key (Short press to stop playback under the
CD/USB/TF mode; Short press to stop the record when record the music, Long press to
select USB/TF/BT/CD mode)
Operation
SET-UP: Place your record player in a secure location where it will be protected from
the elements or possible falls.
POWER CONNECTION: Plug in the record player and make sure your outlet voltage
corresponds to the voltage stated on the appliance rating label. (Remark: Please unplug
the AC power supply plug If it is not used for a long time.)
TURN ON: Turn on the Power ON/OFF key and adjust the volume to an appropriate
level by Volume knob.
PHONO MODE: Turn the Function switch knob to the PHONO position.
INSERT THE VINYL RECORD (Not include): Carefully remove the vinyl record from its
case and place the record on the turntable plate.
SPEED SELECTION: Select the speed between 33, 45 and 78 rpm through speed
switch according to the speed of vinyl record. When playing a 45 RPM vinyl record, use
the included 45 RMP adaptor.
MOVE THE NEEDLE: Take off the protector of needle, release the tone arm lock and lift
up the tone arm by arm lifter, slowly and gently move the needle over the record, put it
on the outermost part or the desired position of the vinyl record.
DROP THE NEEDLE: Use the lifter lever put down Tone Arm slowly on the outermost
part or desired position on the vinyl record.
ENJOY YOUR MUSIC: Once above steps are completed, then the vinyl record will play
music. (the turntable will stop automatically if the auto-stop switch is in the ON position
when the needle has reached the end of the vinyl record . If the switch is in the OFF
position then it will keep revolving until the tone arm is moved.)
FINISHING UP: Lift up the tone arm and put it back and lock it once finished, put on
the protector of needle, turn off the Power Switch.
Connecting to an external sound system
Connect an RCA audio cable (not supplied) to the AUDIO LINE OUT sockets on the rear of
the turntable.
Connect the other end of the cable to an AUDIO INPUT on the amplifier.
Red plug into R channel output.
White plug into L channel output.
CD/MP3 Playback
Turn the Function switch knob to the CD position until "CD" appears on the screen.
Short press OPEN/CLOSE button to open the tray, then "OP" will appears on the
screen. Place a disc on the tray correctly. (Remark: Do not place more than one disc in the
tray at a time and do not force the tray by hand when it is opening and closing. The disc
must be placed in the centre of the disc tray. If the disc is not properly inserted, it may not
be possible to get the disc out once it has closed. )
Short press OPEN/CLOSE button to close the tray, the "CL" will appears on the screen.
After that the system will read TOC and start playback in sequence automatically.The
screen will display current playing progress.(Remark: No disc load, then "NO" will appear
on the screen; Unrecognized disks will appear "ERR" on the screen).
Press the PLAY/PAUSE button [▶ǁ]during playback, the playback will stop at the
current position. To resume playback, press the PLAY/PAUSE button [▶ǁ] again.
Press the Stop button [ ]during playback, the device will stop to playback. Press the
PLAY/PAUSE button [▶ǁ] again, it will restart playing from the first track.
11
