Idiomas disponibles
Idiomas disponibles
• Replace defect LED module and connect the two
ends of the plug-in device.
• Insert new lamp properly in the bulb holder. Re-
place the grease filter(s).
Troubleshooting
Before you contact an authorized specialist
Problem / Cause / Solution
Appliance is not working properly or at all
- Check the power supply.
- Check the power level.
Appliance is not working efficiently
- Check the power level.
- Is the kitchen properly ventilated?
- Clean the grease filter(s).
- At recirculation mode, check the carbon filter.
- Check the air outlet.
Light does not work
- Check the bulb, see
Oil is dripping
- Clean the grease filter(s).
NOTE:
If a problem persists after following the steps above,
contact your trader or an authorized technician.
Technical Data
Electrical connection............................................
Connection voltage: ..................220-240 V~ / 50 Hz
Connection power: ........................................73 W
Lighting, LED: .......................................2 x 1.5 W
Protection class: ...............................................I
Weight / Dimension in mm.....................................
Net weight: ...................................approx. 12.0 kg
"Replacing the bulb"
.
Available accessory............................................
Activated carbon filter for recirculation mode: ...........
KF 574 (Art.-No. 257 400)
The right to make technical and design modifications
during continuous product development remains
reserved.
This appliance has been tested according to all rele-
vant current CE guidelines, such as electromagnetic
compatibility and low voltage directives, and has
been constructed in accordance with the latest safety
regulations.
68
not supplied
