Idiomas disponibles
Idiomas disponibles
ENGLISH
4.4
LED Indications
SMARTSHUNT unit features two RGB LEDs on top
side for quick status indication. One for general status
of unit while the other is for battery state of charge
indication. All possible modes are described in tables
below:
•
Status LED:
Colour
Blinking blue LED
with 1 Hz
Blinking blue LED
with 10 Hz
Solid blue LED
Solid violet LED
Blinking red LED
Table 4: Status LED color description
•
Battery LED:
Colour
Blinking red LED 1
SMARTSHUNT is not
Hz
configured
Solid red LED
State of charge <30 %
Solid yellow LED
State of charge <50 %
Solid green LED
State of charge >50 %
Table 5: Battery LED color description
Description
Working CAN network
Initialization of WIFI
network
WIFI initialized,
configuration disabled
WIFI initialized,
configuration enabled
Hardware fault
Description
5 Configuring
SMARTSHUNT
For
proper
operation
configured prior use. Configuration can be performed
via WiFi connection or NMEA2000 network with one
of LXNAV devices.
There are several parameters that should be either
selected from available options or written by the user.
Selecting right parameters is crucial for correct
calculations and displaying warnings.
Battery
parameter
Bank type
Chemistry type
Battery type
Nominal voltage
Rated capacity
Temperature
Table 7: Battery parameters
Page 12 of 112
SMARTSHUNT
must
Options
Main battery, primary
battery, secondary battery,
auxiliary battery, port
battery, starboard battery,
bow battery, stern battery,
solar battery, starter
battery, battery bank 1,
battery bank 2 and "other"
battery
Lead Acid, Li-Ion, Ni-Cad,
Zn-O, Ni-Mh
Flooded, GEL, AGM
6 V, 12 V, 24 V, 32 V, 36 V,
42 V, 48 V
Should be set by the user
according to battery
capacity
Celsius, Fahrenheit, Kelvin
be
