Idiomas disponibles
Idiomas disponibles
Radio
Basics
continued
Preset Station Setting
Up to 24 stations can be preset in the station memory as follows;
few
Me | eme | am
Co stations | Gstations [Estations | 6 stations |
F
SE
77)
+
ve
Manual Station Preset
a
@ Press BAND to select a desired band.
© Use manual or seek tuning to find a station that you want to program
into memory.
@ Press and hold one of the station selector buttons 1 through 6 until
the display blinks. The memory is now set for that button on the band
you have selected.
i
Repeat the process to set other stations for the FM1 to AM bands.
N
|
e
tN
DJa-
-
BUTTON
NUMBER
| JUE.
may
|
FT
Note: You can change the memory setting by repeating the above pro-
cedure.
i
Tuning in a Preset Station
Press any of the buttons 1 through 6 to tune in the station preset by the
above steps Q) to @.
Auto Preset Memory
Select a band, and press and hold BAND (APM) for more than 2 sec-
onds.
|
e The 6 strongest available stations will be automatically set in memory
on preset buttons 1 through 6.
e Once set, the preset stations are sequentially scanned for 5 seconds.
e Press the appropriate preset button for the station you want to hear.
To reduce interference during
FM broadcasts (MONO)
Press and hold SEL for more than 1 second for monaural reception in
case a lot of interference is present in an FM stereo signal or to improve
the listening quality of weak FM broadcasts.
To turn it off press SEL for
more than 1 second again.
in
37
:
jc. i FREY
| CAUTION: For safety reasons, do not attempt to program while driving.
e
CQ-R255SEUC
|
12
