EVVO R9 Manual página 41

back again.
5. TROUBLESHOOTING
Robot vacuum cleaner
Problem
The robot does not
start up or does not
clean.
The robot vacuum clea-
ner cannot charge or
return to the self- emp-
tying base.
The robot does not
work properly.
The robot emits a stran-
ge noise during clea-
ning.
Possible cause and solution
The robot does not operate when the
battery is low. Allow it to charge before
operation.
The room temperature is below 0ºC or
above 40ºC
There are too many obstacles near the
self-emptying base. Relocate the char-
ging base to an area free of obstacles.
Clean the charging terminals on both
the charging base and the robot.
Make sure the robot vacuum cleaner is
on.
The robot vacuum cleaner is too far
away from the self- emptying base. Pla-
ce it closer and try again.
Turn off the robot vacuum cleaner and
turn it on again
Reset the robot by pressing the reset
side button.
The main brush, side brush, or omnidi-
rectional wheel may be blocked or tan-
gled. Stop the robot and clear them up.
EVVO ROBOT ASPIRADOR R9D LÁSER
ENGLISH
41
loading

Productos relacionados para EVVO R9

Este manual también es adecuado para:

R9 laser