ENGLISH
combine areas, and edit cleaning mode, suction power, and scrubbing level in each
selected area.
Robot vacuum cleaner's Location function
Allows to locate the robot vacuum cleaner on the map.
4. CLEANING AND MAINTENANCE
Main brush cleaning
The main brush spins at top speed and helps introduce dirt into the suction nozzle.
This brush is in contact with the floor, and therefore with dirt, so it can be worn out
over time, affecting negatively to the cleaning efficiency. Therefore, it is recommended
to change the main brush maximum every 320 hours or less.
1. Slightly press the main brush frame's tabs to open the main brush compartment
and remove it. Fig. 9
2. Remove hair, lint, and other dirt trapped in the brush and around the shafts with
the help of the self-cleaning brush. Fig. 10
3. Clear and clean the robot vacuum cleaner's suction channel.
4. Reinstall the main brush and its frame.
Recommendation
It is recommended to clean the main brush once a week with the help of the self-
cleaning brush.
Side brushes. Fig. 11
Side brushes are designed with multiple bristles and are used to push dirt towards
the suction mouth and to thoroughly clean edges and corners. These brushes can
wear out over time, negatively affecting cleaning efficiency.
Recommendation
38
EVVO ROBOT ASPIRADOR R9D LÁSER
