ENGLISH
- It is recommended to clean the side brushes once a week with the help of the self-
cleaning brush.
- Remove the side brushes by pulling them outwards and clean them regularly.
Recommendation
In order to ensure a perfect cleaning, it is suggested to replace the side brushes every
3 months, depending on the frequency and type of use.
Mixed tank. Fig. 12
- Take the Wet & dry tank out.
- Open the mixed tank cover and empty it.
- Remove the filter and filter holder as shown in figure 13.
- Use the cleaning brush to clean the inside of the mixed tank.
- You can clean the dust compartment with water, without immersing the tank.
- Reinstall the mixed tank on the robot vacuum cleaner.
High-efficiency filter. Fig. 13
- The high-efficiency filter is designed with fibres that help trap dust particles, dust
mites, pollen... It is very important to periodically clean the filter, to avoid these particles
from building up in the filter, causing efficiency loss. It is convenient to carry out this
maintenance once a week.
- Replace the high-efficiency filter every 3 months, depending on the frequency and
type of use.
Recommendation
You can remove dirt from the high-efficiency filter with a small brush or gently shake
the filter on a hard surface to remove the dust. The high-efficiency filter cannot be
washed.
Mesh primary filter and sponge filter
The filtering system is featured with a primary mesh filter and a sponge filter,
located next to the high-efficiency filter. It is suggested to replace them either after a
maximum of 160 hours of use or when they are worn out due to operation.
Recommendation
Dirt can be removed with a small brush or by shaking carefully against a hard surface
for dust to fall off. You can also use warm water without detergents to obtain better
39
EVVO ROBOT ASPIRADOR R9D LÁSER
