Fein ARAD18BCAS Manual De Instrucciones página 18

1 609 92A 7AJ • 14.10.22 • T
en
18
– AUX: External audio source (e.g. smartphone)
via the 3.5‑mm socket AUX IN (24) in the con-
nector compartment (15),
– : External audio source (e.g. smartphone) via
the Bluetooth ® connection.
The current audio source can be seen on the au-
dio source indicator (b) or Bluetooth ®
indicator (a).
The audio sources DAB and DAB2, as well as FM
and FM2, do not differ in their functionality; they
offer only additional preset spaces.
Setting/saving DAB+ radio stations
To select the audio source DAB+ radio stations,
press the source button (7) until DAB or DAB2
appears on the audio source indicator (b).
After a short initialisation, the last set radio station
will be played back.
Each station name appears on the top line of the
multi-function indicator (j). The additional in-
formation shown on the bottom line of the
multi-function indicator can be set with the
menu function.
– To switch the station, turn the source
button (7) until the required station is shown in
the display. Press the source button (7) to con-
firm the selection. The radio will switch to the
selected station.
Alternatively, you can press the seek button
(scan down) (10) or the seek button (scan
up) (9) to switch the station. The radio will
switch to the next available station (in alpha-
betical order, either descending or ascending).
– To save a set station, press the preset
button (5) of the required storage space until
the number of the storage space appears in
the storage space indicator (c).
If the four storage spaces of the DAB audio
source are occupied, then switch to the DAB2
audio source, in which four further storage
spaces are available, by pressing the source
button (7). Please note that you must reset the
required station after switching to save the
change.
– To start playback of a saved station, briefly
press one of the preset buttons (5). The num-
ber of the storage space will appear on the
storage space indicator (c). If required, switch
between audio sources DAB and DAB2 by
pressing the source button (7), to allow you to
go back to all saved stations.
Note: If the radio signal is weak, <Weak Signal>
will appear on the multi-function indicator (j). In
this case, you can manually start the DAB+ sta-
tion search.
To do this, either select <Auto Scan> from the
menu or press the seek button (scan down) (10)
and the seek button (scan up) (9) simultaneously.
After the station search is complete, four stations
will be saved in preset spaces 1 to 4. Stations that
have already been saved will be overwritten
here.
If no DAB+ radio stations can be found, <No DAB
Station – Please Auto Scan> will appear on the
multi-function indicator (j).
Setting/Saving FM Radio Stations
To select the audio source FM radio stations,
press the source button (7) until FM or FM2 ap-
pears on the audio source indicator (b).
The frequency of each current station will appear
on the top line of the multi-function indicator (j).
English
The additional information shown on the bottom
line of the multi-function indicator can be set
with the menu function.
If there is sufficiently good reception of a suitable
signal, the radio will automatically switch to ste-
reo reception, and the stereo indicator (h) will
appear in the display. The reception type can be
changed to mono reception with the menu
function.
– To set a specific station, turn the source
button (7) (TUNE) until the required frequency
or the required station is shown in the display.
– To search for the next station with high sig-
nal strength, briefly press the seek button
(scan down) (10) or the seek button (scan
up) (9). The next station found is shown in the
display and played back.
– To search for all stations with high signal
strength, press the seek button (scan
down) (10) or the seek button (scan up) (9) for
longer than half a second. Any station found is
played back for 5 seconds, then the search is
continued until the end of the frequency band.
To cancel the station search, briefly press the
seek button (scan down) (10) or the seek but-
ton (scan up) (9).
– To save a set station, press the preset
button (5) of the required storage space until
the number of the storage space appears in
the storage space indicator (c).
If the four storage spaces of the FM audio
source are occupied, then switch to the FM2
audio source, in which four further storage
spaces are available, by pressing the source
button (7). Please note that you must reset the
required station after switching to save the
change.
– To automatically search for and save the
stations with the best reception
(AUTOSTORE), press the seek button (scan
down) (10) and the seek button (scan up) (9)
simultaneously. The radio will check all receiv-
able stations and save the four stations with
the best reception in preset spaces 1 to 4.
Please note that stations that have already
been saved will be overwritten here where ne-
English