Teac R-H300 Manual Del Usuario página 9

Troubleshooting
Problem
Probable cause(s)
Suggested remedy
Tape moves but no sound is heard.
The volume control of the stereo amplifier
is set to its minimum position.
Adjust the volume control to the desired
level.
The input selector of the stereo amplifier
is not set to the 'tape 1° position.
Set to the 'tape 1° position.
Strange tone quality or ragged sound. The noise-reduction switch is not set to
the correct position.
Set the switch to the position corresponding
to the setting used for recording.
Playback sound is unclear or wavering
and clear recordings can't be made.
The heads are dirty. There is foreign
material on the pinch rollers or capstans.
Clean the heads as described in the
section "Head Maintenance'.
ENG