Teac R-H300 Manual Del Usuario página 4

Connections and Rear Panel Overview
12)
LINE IN' TINE OUT.
CONTROL
3)
@ REMOTE CONTROL jacks
These jacks are used for the connection of
the TEAC Mini Component system (T-H300,
A-H300, PD-H300) for the purpose of
operating it using the Remote Control unit
(RC-613 provided with the A-H300
amplifier) or system control signals.
@ LINE OUT jacks
Connect these jacks to the TAPE 1 PLAY
jacks on the amplifier:
White pin-plug —> White jack (left)
Red pin-plug —> Red jack (right)
@ LINE IN jacks
Connect these jacks to the TAPE 1 REC
jacks on the amplifier:
White pin-plug —> White jack (left)
Red pin-plug —> Red jack (right)
e
QAC power cord
Plug this AC power cord into an AC wall
socket or AC OUTLET on the amplifier or
tuner.
Note:
The remote control unit is not provided
with this unit.
If hum or buzz takes place during play
@ installing this unit right above the
amplifier may cause humming.
Therefore, install it beneath the amplifier
or where there is little humming.