Function; Adjusting The Flow Time - Franke AQLT0135 Instrucciones De Montaje

13. Function

Trigger the flow of water
13.1 Press the pressure cap.
• The water will flow.
• The water flow stops automatically once the preset flow time has expired.
☞
The flow time is adjustable from 1 - 50 seconds.
Temperature selection

14. Adjusting the flow time

14.1 Set the desired temperature of the mixed water.
14.2 Remove the cover platelet.
14.3 Use a screwdriver to set the flow time.
+ longer flow time (max. 50 s)
– shorter flow time (min. 1 s)
14.4 Trigger the fitting to measure the flow time.
14.5 Once the desired flow time has been set, put the cover plate place.
- 7 -