Idiomas disponibles
Idiomas disponibles
ENGLISH
Page 8
Section 2.
2.1
Product Overview
This manual provides instructions for installing the Jandy TruSense Water
Chemistry Analyzer.
NOTE: Installation of the Jandy AquaLink
required prior to the installation of the Jandy TruSense Water Chemistry
.
Analyzer
Sensors measure the following:
• pH (hydrogen potential): this value measures the acidic or basic
character of a medium. pH contributes to the effectiveness of the
disinfectant.
• ORP/REDOX (measurement of active sanitizer in mV): The ORP
measurement is reflected in millivolts (mV). The measurement taken by
the ORP probe is a voltage expressed in millivolts (mV), which repre-
sents the more or less oxidizing nature of the water. Only available on
TRUSENSE model.
• Bonding lug helps reduce stray current.
2.2
Product Contents
1 - TruSense Water Chemistry Analyzer
2 - pH Sensor (blue) with storage tube
3 - ORP Sensor (red) with storage tube*
4 - pH 4 and pH 7 calibration buffer solution
5 - ORP 470 mV calibration buffer solution*
*
T
he ORP sensor and ORP buffer solution are only available on the TRUSENSE model.
NOTE: Keep the pH & ORP sensor storage tubes and buffer solution
packets for future use.
Jandy
General Overview
TruSense Water Chemistry Analyzer | Owner's Manual
®
RS Revision X or later is
®
