Bestron DYL1600E Manual Del Usuario página 27

user's instructions
2. Slide the telescopic tubes onto the hose handle, see Figure 3A.
3. Press the button on the telescopic tubes and keep it pressed in;
you can then extend or retract the tubes to the required length.
See Figure 3B.
4. Press the foot button on the nozzle to set the combi nozzle for use on hard or
soft surfaces, see Figure 4. For use on hard surfaces, press the foot button on
the combi nozzle to extend the brushes. Lift the button for use on soft surfaces.
5. The power cord has a yellow and red mark,
see Figure 5. Pull out the cord to the
yellow mark.
Never pull out the power cord beyond the red mark. This could damage the power cord.
6. Put the plug in the wall socket, and press the On/Off switch.
To switch off the appliance, press the On/Off switch again,
see Figure 6.
7. The appliance is now ready for use. You can move the vacuum
cleaner while you are cleaning by pulling on the hose grip. You can
lift the appliance with the vacuum cleaner's handle.
Note If so required, you can reduce the suction quickly by moving the
slide on the hose grip.
A
Figure 3
27
B
Figure 4
Figure 5
Figure 6