a)
The O - ring seal for piston pump may be
worn. See instructions 1-c.
b) The unit may have air trapped in the system.
See instructions 1-b
c) The overload valve is factory adjusted for the
jack to lift 1.5 tons load should not be altered.
Examine jack for finding causing loss of load.
SPECIFICATIONS
MAX HEIGHT
MIN HEIGHT
(cm)
A
30
13,5
6
HEIGHT
HEIGHT
(cm)
(mm)
B
C
160
WARNING
This is lifting device only: load must be suppor-
ted by proper rated capacity jack stands under
the vehicle before stanting inspection or work.
Do not overload-jack capacity is 1.5 tons.
Overloading can cause damage to jack and/or
failure resulting in personal injury or property
damage: this jack is designed for use on hard le-
vel surfaces use on other than hard surfaces can
result in jack instability and possible loss of load.
WIDTH
WIDTH
(mm)
(mm)
(mm)
E
F
G
140
130
202
LENGTH
LENGTH
CAPACITY
(cm)
(cm)
D
D2
38,2
73
OIL
(ml)
60