Idiomas disponibles
Idiomas disponibles
To change the notification time setting:
1. Press the Set button. (Notification Time 1 will blink.)
+ To change the setting for Notification Time 2 or 3, press the Adjust
button to display Notification Time 2 or 3.
2. Press the Set button twice. The hour value will blink.
3. Press the Adjust button repeatedly to set the desired hour.
4. (1) Press the Set button. The minute value will blink.
(2) Press the Adjust button repeatedly to set the desired minute.
5. Press the On/Off and Start button to complete the setting.
To cancel the measurement notification sound:
1. Press the Set button. (Notification Time 1 will blink.)
e To change the setting for Notification Time 2 or 3, press the Adjust button
to display Notification Time 2 or 3.
2. Press the Set button once. The AA and on will blink.
3. Press the Adjust button. oF F will be displayed.
4. Press the On/Off and Start button to complete the setting.
+ When the set time is reached, the measurement notification sound will
sound to notify you that it's time to take a measurement.
» If the set time is reached in the middle of taking a measurement, the
measurement notification sound will not sound.
+ When the measurement notification sound sounds, it can be stopped by
pressing the On/Off and Start button. If the button is not pressed, the
sound stops after 1 minute.
e If the blood pressure monitor is put into a bag, desk, etc., it may not be
possible to hear the measurement notification sound.
e Notification Time settings are retained even
when
the batteries are
changed.
Advice:
If a record table is made of the measurement values taken around the same
time, you can easily see your own daily blood pressure changes.
28
