To Assemble Cleaner - Panasonic QUICKDRAW MC-V5247 Instrucciones De Operación

TO ASSEMBLE CLEANER
A WA RNIN G Electric Shock Hazard.
DO NOT plug into electrical supply until assembly is complete. Failure to do so could
resuit in electric shock or injury.
installed for shipping
purposes. Please
remove the screw
before inserting the
handle. Insert
the handle as shown in
the illustration. Ensure that
the cord hooks are on the
back side of the handle before
inserting.
1. The handle screw has been 1
Handle —»*
3. There is a recessed area between
the upper cord hook base and the han-
dle that is designed to secure the
power cord during vacuuming.
Always push the power cord
down into this recessed
area to help keep the power cord
from hanging near the noz-
zle and being damaged by
the agitator.
1. The upper cord hook has
a quick-release action. To
release the power cord, rotate
the hook downward and the
complete power cord will
drop off the hook for
immediate use.
2. Line up the small hole in
the handle with the small
hole in the vacuum cleaner
and insert the screw that
you have removed.
Use a screwdriver to
ensure the screw is
tightened securely.
4. Loosely wrap the power cord
around both cord hooks. Secure
the plug head to the cord by
pushing the power cord into
the retalner on
the plug head.
Retainer
(Plug Head)
2. DO NOT unplug the power
cord by pulling on the cord.
Grasp the plug head and pull to
unplug the vacuum cleaner.
Return the hook to the
upright position before
attempting to rewind the cord.