Idiomas disponibles
Idiomas disponibles
атына
A
E
pm
Always operate the vacuum with a genuine Panasonic Type U3 Standard or U6
Electrostatic dust bag installed. Panasonic dust bags may be ordered through any
authorized Panasonic dealer.
1. Pull outward on
the dust cover grip,
located on the top of
the dust cover and
remove the cover.
3. Spread out the end
of the new dust bag.
NOTE: Pull carefully so
as not to tear the bag at
the folds.
5. Reinsert the tab
provided on the end of
the dust cover into
the groove on the
dust compart-
ment to allow
the cover
to rotate
closed.
NOTE:
The dust
Groove
cover
must be completely and
correctly installed for proper
operation.
2. To remove the dust
. bag, grasp the card-
board portion of the
dust bag and pull
it out.
4. Attach the new dust bag
onto the bag holder by hold-
ing the cardboard portion
and pushing back as illus-
trated.
6. Rotate
the dust
cover up into
the closed posi-
tion and press into
place.
NOTE: The dust
bag should not
be caught
between
the lower
edge of the dust
cover and the gasket
as indicated by the arrow
in the illustration.
-13-
