Idiomas disponibles
Idiomas disponibles
BEFORE REQUESTING SERVICE
A
WA
RNIN G
Electric Shock or Personal Injury Hazard.
Disconnect the electrical supply before servicing or cleaning the unit. Failure to do
so could result in electric shock or personal injury from cleaner suddenly starting.
Review this chart to find do-it-yourself solutions for minor performance
problems. Any service needed, other than those described in these
Operating Instructions, should be performed by an authorized service
representative.
PROBLEM
POSSIBLE CAUSE
POSSIBLE SOLUTION
1. Unplugged at wall outlet.
1. Plug in firmly. Push On/Off
Cleaner
will not run.
switch to On.
2. On/Off switch not turned on.
2. Push On/Off switch to On.
3. Tripped circuit breaker/blown
fuse at household service panel.
3. Reset circuit breaker or replace
fuse.
4. Tripped motor protector.
4. Unplug vacuum, wait 30 minutes,
plug in and switch to ON.
Poor job of dirt
| 1. Full or clogged dust bag.
pickup.
1. Change bag.
2. Broken belt.
2. Replace belt.
3. Clogged hose or nozzle.
3. Clean hose or nozzle area.
4. Hose not inserted fully.
4. Insert hose.
5. Worn brushes.
5. Replace brushes.
6. Hole in hose.
6. Replace hose.
7. Dust cover improperly installed.
7. Properly Install dust cover.
Dust escapes
the paper bag.
1. Bag improperly installed.
1. Properly install bag.
2. Bag torn.
2. Replace bag.
Light wil!
1. Burned out light bulb.
1. Replace light bulb.
not work.
- 18 -
