Idiomas disponibles
Idiomas disponibles
PRODUCT
SPECIFICATIONS
HORSEPOWER
13 HP
DISPLACEMENT
20.85 cu. in.
GASOLINE
4 quarts
CAPACITY
(unleaded)
OIL CAPACITY
5W30
(28 oz capacity)
SPARK PLUG:
Champion RC12YC
(Gap .030 in.) or
equivalent
VALVE CLEARANCE
Intake:
0.004 - 0.006 In.
Exhaust:
0.009 - 0.011 In.
SNOW THROWER
AUGER DRIVE BELT
Adjust the auger drive belt after the first
2 to 4 hours of use, again about mid-
season and twice each season thereaf-
ter (See "Belt Adjustment"
in the
Service and Adjustment
section).
AUGER SHAFT LUBRICATION
EVERY 10 HOURS
1. Lubricatethe Zerk fittings (A) everyten
hours with a grease gun.
2. Each time a shear bolt is replaced,
the auger shaft MUST be greased.
See Figure 25. See To Replace Au-
ger Shear Bolt in the Service and
Adjustment
section.
A
Figure 25
AUGER GEAR BOX
The auger gear box is lubricated at the
factory and should not require addition-
al lubrication. If for some reason the
lubricant should leak out, have auger
gear case checked by a competent re-
pairman.
F-021073L
21
