Craftsman 536.889250 Manual Del Operador página 20

Idiomas disponibles

Idiomas disponibles

SERVICERECORDS
Fill in dates as you
Before
Every
Every
Every
completeregular
Each
5
10
25
Each
Before
SERVICE
service.
Use
Often
Hours
Hours
Hours
Season Storage
DATES
Lubricate Auger Shaft
-V r
-V r
Change Engine Oil
!/
!/
Remove Fuel
-_
* Adjust after 2 to 4 hours of use.
1-Adjust after First 10 hours and then Every 25 hours of use.
GENERAL RECOMMENDATIONS
The warranty on this snow thrower
does not cover items that have been
subjected to operator abuse or negli-
gence. To receive full value from the
warranty, the operator must maintain
the snow thrower as instructed in this
manual.
Some adjustments will need to be
made periodically to properly maintain
your snow thrower.
AFTER EACH USE
Run the machine to clear the auger
of snow.
To prevent freezing of the auger or
controls, remove all snow and slush
from the snow thrower.
Check for any loose or damaged
parts.
Tighten any loose fasteners.
Check and maintain the auger.
Check controls to make sure they
are functioning properly.
If any parts are worn or damaged,
replace immediately.
F-021073L
20
loading