Idiomas disponibles
Idiomas disponibles
MULTI JOG
4
[]
CD EDIT/
CHECK
1,8
-4
-3,7
-5
-3,7
The AI edit recording function enables CD recording without
worrying about tape length and track length.
When a CD is
inserted, the unit automatically calculates the total track length.
If necessary, the order of tracks is rearranged so that no track is
cut short.
(AI: Artificial Intelligence)
AI edit recording
will not start from a point halfway into the tape.
The tape must be recorded
from the beginning
of either side.
1 Insert the tape
into deck 2.
Insert the tape with the side to be recorded on first facing out
from the unit.
2 Press CD and load the disc(s).
3 Press EDIT/CHECK once while pressing SHIFT
on the remote control.
"EDIT" appears.
EDIT
• When "PRGM" is displayed,
press EDIT/CHECK
while
pressing SHIFT again.
4 Press DISC DIRECT PLAY 1-3 to select a disc.
5 Press
numbered
buttons
0-9 on the remote
control to designate the tape length.
10 to 99 minutes
can be specified.
Example:
When using a 60-minute
tape, press 6 and 0.
In a few seconds,
the tracks to be recorded
on each side of
the tape are determined.
• 41_1, _
or MULTI
JOG are also available
to designate
the tape length.
Remaining
time
Tape length
of recording
?
Tape side
A: First recording
side
B: Second
recording
side
Programmed
tracks for side A
6
7
Press •
REC/REC MUTE to start recording on
the first side.
The tape
is rewound
to the beginning
of the first side, the
lead segment
is played through for 10 seconds,
and recording
starts. When the last track programmed
for side A is finished,
deck 2 enters
the recording
stop mode.
After entering
the
recording
stop mode, go to step 7.
Press EDIT/CHECK while pressing SHIFT on the
remote control to display the program for the
second recording.
"B" is displayed.
Turn over the tape in deck 2 and press •
REC/
REC MUTE to start recording on the second side.
To stop recording
Press •. Recording and CD play stop simultaneously.
To clear the edit program
Press • CLEAR twice so that "EDIT" disappears on the display.
To check the order of the programmed track numbers
Before recording, press EDIT/CHECK while pressing SHIFT on
the remote control to select side A or B, and press <1< or
repeatedly.
Programmed
Track number
track numbers
Program number
To add tracks
from
other
discs
to the edit program
If there is any time remaining
on the tape after step 5, you can
add tracks from other discs in the CD compartment.
1 Press
EDIT/CHECK
while
pressing
SHIFT
on the remote
control to select side A or B.
2
Press DISC DIRECT
PLAY 1-3 to select a disc.
3
Press numbered
buttons on the remote control to select tracks.
A track whose
playing time is longer than the remaining
time
cannot be programmed.
4
Repeat
steps 2 and 3 to add more tracks.
Time
on cassette
tapes
and editing
time
The actual cassette
recording
time is usually a little longer than
the specified
recording
time printed
on the label. This unit can
program
tracks to use the extra time.
When the total recording
time is a little longer than
the tape's
specified
recording
time
after editing,
the display
shows the extra time (without
a minus
mark), instead
of the time remaining
on the tape (with the minus
mark).
The
AI edit
recording
function
cannot
be used
with
discs
containing
31 tracks or more.
* CD EDIT/CHECK
on the unit is also available
instead
of EDIT CHECK
on the remote
control.
ENGLISH 14
