Tabla de contenido
Idiomas disponibles
Idiomas disponibles
....
?r?
This section explains how to record from the tuner, CD player, or
external equipment.
2
3
II
r
1
Preparation
• Use Type ! (normal)
tapes only.
• Set the tape to the point where
recording
will start.
• Note that recording
is done on only one side of the tape.
1 Insert the tape to be recorded on into deck 2.
Insert the tape with the side to be recorded
on first facing out
from the unit.
EJECT
Press function
(CD, TUNER, VIDEO/AUX or MD)
and prepare the source to be recorded.
To record from
a CD press CD and load the disc(s).
To record from
a radio broadcast,
press TUNER
and tune
in to a station.
To record from a connected
source
press VIDEO/AUX
or
MD.
3 Press •
REC/REC MUTE to start recording.
INSERTING
BLANK SPACES
Insertion of 4-second blank spaces enables you to activate the
Music Sensor function. (Applicable when the source is TUNER,
VlDEO/AUX or MD.)
1 Press •
REC/REC MUTE during recording or while in
recording pause mode.
on the display flashes for 4 seconds and 4-second blank
space is made. Then, the deck enters the recording pause
mode.
2 Press II to resume recording.
To insert a blank
space
of less than 4 seconds,
press
•
REC/REC
MUTE again while _
is flashing.
To insert
blank spaces of more than 4 seconds
after the deck
enters recording
pause mode, press •
REC/REC
MUTE again.
Each time the button
is pressed,
a 4-second
blank space
is
added.
f
About
cassette
tapes
• To prevent accidental
erasure,
break off the plastic tabs
on the cassette
tape after recording
with a screwdriver
or
other pointed tool.
Side A
Tab for side A
To record on the tape again, cover the tab openings
with
adhesive
tape, etc.
• 120-minute
or longer
tapes
are extremely
thin and easily
deformed
or damaged.
They are not recommended.
• Take up any slack
in the tape with a pencil or similar tool
before use. Slack tape may break or jam in the mechanism.
i-
_!!ii_aiiiiil
When the selected
function
is CD, playback
and recording
start simultaneously.
When recording
from a connected
source,
start playback
of
the source.
To stop recording,
press II.
To pause
recording,
press
II. (Applicable
when the source
is
TUNER,
VIDEO/AUX
or MD) To resume recording,
press it again.
Sound
adjustment
during
recording
The output
volume
and tone (except
BBE) of the speakers
or
headphones
are freely varied without
affecting
the level of the
recording.
To erase
a recording
Make sure the microphone
is not connected
to this unit.
1
Insert the tape to be erased into deck 2 and press TAPE DECK
1/2 to display "TP 2".
2
Set the tape to the point where the erasure
is to be started.
3
Press _ REC/REC
MUTE to start the erasure.
ENGLISH 12
Tabla de contenido
