Idiomas disponibles
Idiomas disponibles
Proper anchoring is essential to the safety and performance of this product. Use of professional anchoring
services recommended. If improperly anchored, product can move and/or float away. Aquaglide is not
responsible for damage, injury or loss due to improper anchoring.
Open Water: (General guidelines - not intended to replace need for professional installation)
1. Place product in an area protected from wind and boat traffic. Confirm allowances for stated minimum
water depth, safe distance away from hard objects and vertical clearance requirements.
2. Consider prevailing conditions such as wind, waves and other environmental factors in positioning this
item. Inflatable items can be unstable in strong winds. Slide faces are best positioned toward a breeze, not
across it. Check water and seabed for sharp or dangerous objects.
3. Keep product a safe distance from docks, boats, boat lifts, and any other structures. To prevent potential
damage to product, injury or death, NEVER tie the product to a dock.
4. Use one vertical mooring line for each anchor ring with an appropriate weight anchor, ground screw, or
earth anchor at base. For exposed anchorages or water depth greater than 20ft. (6m), bridles connecting
two rings to one mooring line may be preferable.
5. Anchor weight recommendations based on average conditions. Sites with potential for extreme weather,
strong tides, currents, winds and/ or swell should consider using up to 50% additional weight or holding
power.
6. Install anchors and mooring lines before inflating this product.
Anchor Details – Lugeway 10
Anchor rings on product
Recommended anchor qty
2-Way Bridle?
Recommended weight/ anchor
Recommended total anchor weight
Commercial Pool:
1. Product placement in commercial pool should be checked carefully in advance to confirm allowances for
the stated minimum water depth, safe distance away from hard objects (pool edge) and vertical clearance
requirements. Most residential pools cannot meet these requirements.
2. Pool moorings typically use a minimum of 4 horizontal mooring lines made from heavy duty elastic.
Additional horizontal moorings should be added to increase stability and as necessary for larger product
groups.
3. Horizontal Moorings are usually attached to pool anchor eyes, such as those used to secure lane buoy
lines. Adjust mooring lines to keep product(s) under tension at all times.
Lugeway 10 is a floating luge straightaway for use in water. Users may slide or walk the length of the item in
sitting or prone position.
PVC surfaces are slipperier when wet, which can lead to loss of balance when walking or climbing. Slide
surfaces will perform better when previously wetted. Chemical treatments are available to reduce friction on
sliding surfaces, but are not generally necessary if products are kept clean.
Maintain Working Pressure: Air pressure is temperature dependent. Always confirm proper working pressure
before and during use as changing temperatures may affect the internal pressure. If product shows signs of
instability or pressure loss, discontinue use until product is returned to working pressure and/or repairs made.
8
ANCHORING
Qty/ Weight lb (kg)
4
4 (or 2 with bridles)
Optional (2)
550lb (250kg)
2200lb (1000kg)
OPERATION
www.aquaglide.com
