Idiomas disponibles
Idiomas disponibles
•
Clean bathtub thoroughly and wipe dry before applying rail. Contact surfaces must be dry and free of soapy residue to
assure secure installation.
•
Loosen tightening knob until rail is wide enough to slip on to the side of bathtub.
•
To test installation of rail, pull forward, back and side to side. If rail slips or moves, make sure surface is free of soapy
film and is dry, then replace at desired location.
CARE AND MAINTENANCE
Failure to care for and maintain your product may result in the risk of serious injury.
• Regularly clean by hand the product with a damp cloth and a mild detergent and disinfectant. Do not use abrasive
products, detergents or solvent-based products.
• Dry with a clean, dry soft cloth.
• It is recommended that the product be serviced at least once a year. If the product is subject to heavy use and/or use
in a multi-user environment, we recommend that it be serviced more frequently.
• In case of malfunction, do not repair the product yourself. Consult an authorised dealer.
• Checklist :
To keep the product in good condition, check before each use, and check regularly as follows :
Type of control
Seat control
Checking the anti-slip edges
CHANGE OF OWNERSHIP
The product can be reused. It must first be cleaned and disinfected in accordance with hygiene instructions. When transferring
your product, remember to hand over all the necessary technical documents to the new user. Beforehand, the product must be
inspected by an authorised specialist.
RECYCLING
When the product has become unusable and you have to throw it away: please contact your specialist dealer. If you wish to carry
out recycling for yourself, ask your local waste management company for disposal guidelines.
STORAGE
Failure to observe the storage conditions can lead to deterioration of the product and thus to the risk of serious injury.
•
Do not store your product for an extended period of time near a heat source or in the sun (e.g. behind a window or near
a radiator) or near a cold source.
•
Keep away from all flames and sources of sparks.
•
Respect the conditions for storing your product :
•
In a dry and temperate place
•
Protect your product from dust, corrosion (e.g. abrasive elements, sand, sea water, salty air).
•
Store all removed parts together in the same place (or locate them if necessary) to avoid mixing them with other
products when reassembling.
•
All components must be stored without any load (do not place any objects that are too heavy on the product elements,
do not jam anything...).
PERIOD OF USE
The life expectancy of this product is 5 years under normal use, safety and maintenance conditions for a user. Beyond this period,
the product can be used for as long as it is still in good condition.
If the device is used in a multi user environment (such as a nursing home or hospital) then service life may be reduced.
DMI-F-06_Annexe 2_Notice.10
V2-24/04/2023
Method
Adjustment/Visual Control
Adjustment/Visual Control
Frequency
Before each use
Before each use
Page 6 sur 10
