Idiomas disponibles
Idiomas disponibles
SAFETY INFORMATIONS
•
If you remove the ignition key before repairing, you can prevent the engine from being started
accidentally and resulting in engine damage and personal injuries.
•
This manual serves as a brief guide and does not replace a workshop manual. Always refer to
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc..
ENVIRONMENTAL PROTECTION
Recycle unwanted materials instead of disposing of them as waste. Packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with
the environment. Contact your local solid waste authority for recycling information.
USE
A Flywheel
B Crankshaft bore / Pilot bearing
C Clutch disc hub
1. Select a suitable centering piece (1-8), this must fit into the crankshaft bore or into the pilot
bearing.
2. Select a suitable centering mandrel (9-11) and mount the centering piece (1-8) on the thread
of the centering mandrel.
3. Insert the clutch centering mandrel into the clutch hub and fix it in the clutch hub by turning the
knurled screw clockwise.
4. Center the clutch disc with a centering mandrel in the crankshaft bore/pilot bearing and mount
the clutch pessure plate. Caution: When installing the clutch disc, make sure it is installed in
the correct position.
5. Loosen the centering mandrel by turning the knurled screw counterclockwise and pull it out of
the clutch hub.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Flywheel
Flywheel + Clutch disc + Clutch pressure plate
Tel.: 02196 720480
Fax.: 02196 7204820
Flywheel + Clutch disc
D Clutch disc
E Clutch pressure plate
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
