Light Bulb Changing - Sears Kenmore 116.33728 Manual Del Propietário

Electrical Shock Or PersonalInjury
Hazard
Disconnectelectrical supply before
servicing or cleaning the unit.
Failureto do so could result in
elec-
trical shock or personal injury from
cleaner suddenly starting,
TO REMOVE LIGHT BULB
Disconnect power cord from electrical out-
let. Lower handle to lay vacuum flat.
Lens
Pry out light lens at slots.
CAUTION
Do not use a bulb rated over 9W
(t3V). During extended use, heat
from the bulb could overheat sur-
rounding plastic parts.
To replace the light bulb carefully insert
securely into bulb socket. Rotate bulb and
socket 90 ° counterclockwise back to its
original position.
_S Bulb
ocket
Replace lens cover by inserting bottom tab
of lens into slots then applying pressure to
top tabs with a screwdriver. A "popping"
sound indicates lens is snapped properly in
place.
Note: See PARTS AND FEATURES for
bulb number.
E
'.T CAUTION
Do not plug in or turn on until the
vacuum is completely reassem-
bled.
Remove the light bulb by rotating the bulb
and socket 90 ° clockwise and pulling bulb
straight out.
_S Bulb
ocket
16