Troubleshooting - Sears Kenmore 116.33728 Manual Del Propietário

TROUBLESHOOTING
Review this table to find do-it-yourself solutions for minor performance problems. Any service
needed, other than those described in this owner's manual, should be performed by a Sears
service representative.
WARNING
Electrical Shock Hazard
Disconnect electrical supply before servicing or cleaning the unit. Failure
to do so could result in electrical shock or personal injury.
. , '
Cleaner won't run. 1. Unpluggedat wall outlet.
Poor job of dirt
pick-up.
2. Tdpped circuitbreaker/blownfuse
at householdservicepanel.
1. Fullor clogged dust bin.
2. Wrong pile height setting.
3. Worn agitators.
4,
5,
6.
7.
8.
9,
10,
1. Plug in firmly, push ON/Off switch
to ON.
2. Reset circuitbreaker or replace
fuse.
1.
2.
3,
Clogged nozzle. 4.
Clogged hose. 5.
Hole in hose. 6.
Hose not inserted fully 7.
Motor protectionsystem activated. 8,
Dirtyfilters. 9.
Brokenor worn belt 10.
1.
Empty dust bin,, (page 12).
Adjust setting, (page 6).
Take to your nearest Sears
Service Centen
CheckAGITATOR CLEANING, (page 17).
Check for clogs, (page 17).
Take to your nearest Sears
Service Center.
Check hose connection
Check for clogs, (page 18).
Change filters, (page 13/14).
Replace belt (page 17).
Cleaner picks up 1. Wrong pile height setting. Adjust setting, (page 6).
moveable rugs or
pushes too hard,
Light won't work.
Air flow restricted
with attachment use,
Sound changes.
1. Burned out light bulb.
1. Attachment use restrictsair flow.
2. New carpet fuzz cloggedair path.
1. Change light bulb, (page 16).
1. Check ATTACHMENTS. (page 8-9)
2, Check CLOG REMOVAL and clean
hose. (page 18).
19