Bag Changing - Sears Kenmore 116.22085 Manual Del Propietário

Thevacuumcleanercreatessuctionthatpicksup
dirLRapidlymovingair carriesthe dirt to the dust
bagthroughthe airflowpassage& Thedust baglets
the air passthrough,whileit trapsthe dirt.
Forbestcleaningresults,keepthe airflowpassage
open.Checkthe starredareasoccasionally for
clogs°Unplugfromoutletbeforechecking.
BAG CHANGING
For best cleaning results, the dust bag
should be changed often, NOTE= See
PARTS AND FEATURES for Bag #_
Lid
Canister Hood
1. Unplug cord
from wall
outlet,
2. Pull lid
release out
and up, then
lift canister
hood,
3. Remove cardboard
tab from red bag
mount by pressing tab
away and lifting up.
4. Pull bag out of the
red bag mount.
5, The red bag mount will flip forward after
removing bag.]his will prevent the lid from
closing until a new bag is installed,
"_-... Red Bag
_unt
6. Raise red bag mount.
7, Using care not to
crease the cardboard,
install bag into slots as
shown.
NOTE: Creasing the cardboard will cause it
not to lock in place and dirt will not all go
into the bag, Some will miss the bag and
end up in the bag cavity.
Push the cardboard
straight down until it
locks into position and
the holes align,
Tuck the back end of the bag securely down
into the cavity and underneath the bag
retention rib_
Bag
Retention Rib
8. Close and latch
canister hoo&
9. Plug cord into
wall outlet.
!
CAUTION
NEVER REUSE A DUST BAG. Very
fine materials, such as carpet fresh-
ener, face powder, fine dust, plaster,
soot, new carpet lint, etc. can clog
the bag and cause it to burst before
it is full. Change bag more often
when vacuuming these materials.
10