1. INSTALLATION AND OPERATING INSTRUCTIONS
1.1. INTRODUCTION
The
SIBELMED S40
S.A.U. R+D+i
department using the most up to date materials in acoustic
installation.
The
SIBELMED S40
the sound waves between its exterior and interior. This sound attenuation
feature allows audiometric tests to be performed in the noise environmental
conditions specified by the standards related to how these types of measures
should be carried out. (For further information, consult standards ANSI S3.1
and ISO 8253-1).
The booth has an access door with a lock, a window allowing the patient and
operator to see each other, pleasant lighting and the necessary connections to
connect an audiometer with all its accessories.
1.2. PRELIMINARY OBSERVATIONS
This booth has been manufactured following strict quality controls. However,
accidents may occur during transportation or storage of the booths. For this
reason, it is advisable to check the state of the booth before installing it, as
well as the accessories that complement it.
WARNING
IF THE PACKAGING IS DAMAGED IN ANY WAY, IMMEDIATELY
CONTACT THE TRANSPORT AGENCY AND THEIR DISTRIBUTOR BEFORE
PROCEEDING TO INSTALL. DO NOT DISCARD THE PACKAGING, BAGS,
ETC., UNTIL CORRECT OPERATION OF THE EQUIPMENT HAS BEEN
COMPLETELY VERIFIED.
WARNING
DO NOT STORE THE BOOTH UNASSEMBLED. DOING SO MAY CAUSE THE
PANELS TO BECOME DEFORMED AND WILL VOID THE GUARANTEE.
S40 User's manual
soundproof booths have been designed by the
soundproof booth is an individual chamber that attenuates
501-700-MUM · Rev 2.01
EN 4
SIBEL