Idiomas disponibles
Idiomas disponibles
Hazard information
The device is not a toy: do not allow children to play with it. Do not
leave packaging material lying around. Plastic films/bags, pieces of
polystyrene, etc. can be dangerous in the hands of a child.
We accept no liability for damage to property or personal injury
caused by improper use or the failure to observe the hazard warn-
ings. In such cases, all warranty claims are void. We accept no liabil-
ity for any consequential damage.
The device may only be used for fixed installations. The device must
be securely attached within a fixed installation.
The actuator is part of the building installation. Observe the relevant
national standards and directives during planning and set-up. The
device has been designed solely for operation on a 230 V/50 Hz AC
supply. Only qualified electricians (to VDE 0100) are permitted to
carry out work on the 230 V mains. The applicable accident preven-
tion regulations must be observed while such work is being carried
out. To avoid electric shocks from the device, please disconnect the
mains voltage (trip the miniature circuit-breaker). Non-compliance
with the installation instructions can cause fire or introduce other
hazards.
Take the permissible cables and cable cross sections into account
when connecting to the device terminals, and the stripping length of
the conductor being connected, as indicated on the device.
Loads connected to the dimmer outputs require sufficient insula-
tion.
Please take the technical data (in particular the maximum permissi-
ble switching capacity of the load circuits and the type of load to be
connected) into account before connecting a load. Do not exceed
the capacity specified for the actuator.
29
