Idiomas disponibles
Idiomas disponibles
10.1 TURN ON/OFF LIGHTS
1
2
1. Install the batterypack to the jack.
2. Press the bottom (|) of the ON/OFF switch to turn on
the lights.
3. The LED light will always bright white and the
warning lights will blink yellow.
4. To turn off the lights, please press the top (O) of the
ON/OFF switch.
10.2 OPERATE THE JACK
1. Park the vehicle, apply parking brake, and properly
chock wheels. Turn off the engine.
11
10
2. Check the ON/OFF switch to be sure it is in the OFF
(O) position.
3. Installl the battery.
4. Place the jack on the side of the car tire. Make sure
that the center of the saddle is in a straight line with
the contact point of the car chassis.
5. Then rotate the adjusting screw as close as possible
to the chassis of the car.
6. Press the ON/OFF switch to the "|" state first.
English (Original Instructions)
8
1
If you want to press the direction switch to adjust
the pressure rod, you must make sure the ON/OFF
switch is on the "|" state. If no, the machine will not
work.
9
7. Hold the top of the direction switch to rise the
pressure rod. Then the jack will start to work, till the
distance between the car tire and the floor is about
5cm.
8. Reset the direction switch.
While the power is disconnected, the machine
would lock automatically and wouldn't fall.
9. After changing the tire, Hold the bottom of the
direction switch to lower the rod, the jack would start
to fall in constant speed.
10. Press the ON/OFF switch to the "O" state to turn off
the machine.
WARNING
Make sure the engine is off when the vehicle is jacked
up. Because of the vibration of the engine or the
rotation of the wheels, the vehicle will slide off the jack
and cause danger.
In order to ensure the safety of various types of cars,
the jack should have a fixed position when using it.
The jack cannot be used to support bumpers, beams
and other parts.
Passengers cannot remain in the vehicle while
changing wheels as their movement may cause the
vehicle to slip off the jack.
9
NOTE
3
NOTE
EN
