PROMEBA PS-190 Manual De Instrucciones página 53

Ocultar thumbs Ver también para PS-190:
Idiomas disponibles

Idiomas disponibles

USER GUIDE
EN
ELECTRIC CHAIR
06 OPERATION
REV. 2023/10
BELTS
Use the belts to help support the patient in the chair.
On the backrest of the chair you will find a belt with buckle and another with anchor, and also
on the seat.
You must insert the backrest belt buckle to the seat belt anchor and vice versa, until a "click"
is heard, so that the belts are fastened to the patient's torso in the shape of a cross.
Adjust the belt measurement according to the patient.
Check that the belts are properly fastened by pulling on them.
Before each use, make sure that the belts are securely attached to their respective anchor
points.
FOOTREST
To open the footrest, lower it until it stops, to close it again raise it until it stops.
When using the footrest make sure that it does not interfere with the feet of the patient or the
operator.
Before transferring the patient to the chair make sure the footrest is closed, open it after the
patient has sat down.
When the patient has to get out of the chair, close the footrest before unfastening the belts,
in order to avoid standing on it.
Keep the footrest elevated when not in use.
WHEELS BRAKE
The 2 rear wheels of the chair are equipped with brakes to prevent the chair from moving
during the transfer of the patient or during a stop.
To activate them, press down on the upper part of the pedal. To remove, press down on the
front end of the pedal.
Never leave the chair unattended with the patient, always keep it under control. Brakes
should not be used as a substitute for operator control.
FOLDING AND UNFOLDING THE CHAIR
Before folding the chair, it is recommended to lock the rear wheels and fold the footrest, the
carrying handles and the armrests, as indicated in paragraphs 03.3.1, 03.3.2, 03.3.5 and
03.3.6.
To fold the chair, locate the black release bar at the bottom of the seat. Pull the bar to the
front, sliding it through the slot, until the chair is folded down. Verify that the system has been
locked correctly by trying to open the chair without activating the bar, if it is locked the chair
will not open.
53
loading