Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Assembly Instructions
Wall or ceiling mounting
(permanent mounting only)
Install the fan (A) onto a solid vertical surface with the appropriate
3/8 in. hardware through the large mounting hole in the bracket. The
fan (A) should be installed in the direction of the arrow on the label
on the stand.
□
Locate a solid wall stud or ceiling beam. Mark the center of the
beam. If you do not have a solid structural framing member at
that location, you will need to find an adequate alternative for
mounting the fan.
□
Drill a pilot hole for 3/8 in. lag bolt.
□
Secure with the hardware provided (B-E).
Fan can also be mounted to concrete with the appropriate fastener
(not included).
Operating Instructions
Adjust airflow upward or downward
□
Tilt the head of the fan to the desired angle.
Speed control
□
Pull gently on chain to change the setting on the speed control to the desired setting; low, medium or high.
Cleaning
□
Use soft damp cloth then wipe with dry cloth. Do not use harmful cleaners. Do not bend the blades.
4
A
D
E
C
B
Tabla de contenido
