Idiomas disponibles
Idiomas disponibles
STARTING/STOPPING THE EDGER
To start (Fig. 9)
1. Move the lock-off lever forward
and then press the trigger switch
to start.
2. The rotational speed of the blade is
controlled with the trigger switch.
The further the trigger switch is
depressed, the faster the blade
speed is. Adjust the speed to suit
the task at hand.
NOTICE: The motor starts only when the lock-off lever is moved forward and the trigger
switch is depressed at the same time.
To stop
Move the machine away from the spot being edged and release the trigger switch to
stop it.
WARNING:
breaks and after finishing work.
CHANGING SPEED MODE
(FIG. 10)
This machine features three speed
modes.
Each time the speed mode button is
pressed, the speed mode changes.
The speed indicator displays the active
speed mode: One light for low speed, two
lights for medium speed, three lights for
high speed. The low speed mode provides better control of the machine and longer
operating time per charge.
NOTICE: The speed mode can be set before the machine is turned on OR during
operation.When the machine is re-started after a break, the speed mode will return to
the previous speed.
56V LITHIUM-ION COMMERCIAL 8" CORDLESS EDGER — EDX2000/EDX2000-FC
Always remove the battery pack from the machine during work
9
Lock-off Lever
10
Speed
Indicator
Battery-
Status
Indicator
Trigger Switch
Bluetooth
Indicator
SPEED
Speed Mode
Button
21
®
