Idiomas disponibles
Idiomas disponibles
4. Insert the clamp block into the handle slot (Fig. 2c), mount the lock lever and
tighten the wing nut. (Fig. 2d).
5. Pull the lock lever up to move/rotate the handle to a comfortable operating
position. Adjust the front-assist handle position so that it is within the mounting
zone, as shown in Fig. 2e.
6. Fold the lock lever to secure the loop handle in place (Fig. 2f).
2a
Lock Lever
Front-assist
Handle
Clamp
Block
Wing Nut
2c
2e
Mounting Zone
56V LITHIUM-ION COMMERCIAL 8" CORDLESS EDGER — EDX2000/EDX2000-FC
Clamp Block
2b
2d
2f
17
