Idiomas disponibles
Idiomas disponibles
EN
Troubleshooting
Problem
Possible cause
Solution
No power
Check mains connection
No function when ON/OFF Trigger
Switch (5) is operated
Defective ON/OFF Trigger Switch
Replace the ON/OFF Trigger Switch at an authorised Silverline service centre
Stopped working after some
Switch OFF the tool and let it cool down to room temperature. Ensure motor vents
Tool is overheating
operation time
are clear
Blade teeth worn
Replace blade
Poor cutting
Blade damaged
Replace blade
Incorrectly fitted blade
Refit blade
Loose blade
Tighten blade securing bolt
Check and if possible retighten, otherwise have repaired by an authorised Silverline
Vibration or abnormal noise
Other part of tool has worked loose
service centre
Accessory incorrectly fitted or loose
Correctly fit accessory
Track Fine Adjustment Cams (9 & 12) incorrectly tension
Tension correctly to reduce vibration and improve cutting performance
16
