BABY FAS – Issue 04
N.B.: If a key with a credit higher than the maximum acceptable amount is introduced, the key is not
accepted. Furthermore, the key is prevented from having any amount which exceeds the acceptable
maximum loaded onto it; in this case the key is released and the excess amount remains at the disposal of
the user. These options are active if command 69 is set at 6.
Command 32 Minimum coin level in the tubes:
This is the number of coins for each coin box mechanism which must remain in each tube in order to
guarantee the correct function of the coin delivery system. (Consult the manual of the coin box mechanism
for instructions on setting the correct value of this parameter). If a different value is associated to each tube,
the maximum value set must be between those indicated. The setting of this parameter is fundamental for
ensuring the correct coin management by the vending machine.
N.B. The inventory of the tubes, command 38, stops when the contents of each tube reaches the value set at
command 32. To empty the tubes completely, use the delivery pushbuttons of the coin box mechanism.
Command 33 Inhibits single coins:
This command blocks the acceptance of particular coins by the coin mechanism. To block the acceptance of
coin 5 proceed as follows:
1. Go into programming mode to display........................................................................................ Command 00
2. Key in 33 and press B to display ...................................................................................................Coin No. 00
3. Key in 5 and press B to display ......................................................................................................................1
4. Key in 0 and press B.
N.B.:
To activate the possible modifications of command 33, turn the machine off and then on after the
modification itself.
Command 34 Coin inhibition with exact amount:
This command blocks the acceptance of particular coins during small change giving, i.e. when the display
shows the message "insert only exact amount".
1. Go into programming mode to display........................................................................................ Command 00
2. Key in 34 and press B to display ...................................................................................................Coin No. 00
3. Key in 5 and press B to display ......................................................................................................................1
4. Key in 0 and press B.
N.B.: To activate the possible modifications of command 33, turn the machine off and then on after
modification itself.
Command 35 Resetting coin meters in change giving tubes:
Use this command when replacing token meter or emptying the change giving tubes with the machine off to
synchronize the meters with the actual contents of the change giving tubes.
1. Programming mode, display views............................................................................................. Command 00
2. Key in 35 and press B , display views ............................................................................................ Code 0000
3. Key in 6203 and press B.
Command 36 Condition exact amount (no coins available for change):
This command is for setting (for each change giving tube) the number of coins below which the machine can
be considered to be in a condition of 'no coins available for change'. The set value must always take into
consideration the coin minimum level in the tubes (command 32), that is it must be higher than the latter
(example: if command 32 is set at 5, the command 36 values must have a setting of 6 as their minimum
value). The tubes that are not included in this condition must be set at "0".
When the contents of any one of the tubes included in the condition drops below the corresponding set value
the machine displays the warning that there are no coins available for change.
Command 37 Inhibits note validator during exact amount:
Setting this command to 1 during exact amount will inhibit the note validator.
N.B.: If only the note validator is installed, this command has to be set to 0.
FAS INTERNATIONAL S.p.A. Via Lago di Vico, 60 SCHIO (VI) – tel. +39 0445 502011 – fax +39 0445 502010 - e-mail:
[email protected]
33
E
N
G
L
I
S
H