Adjusting Diopter; Measuring - Nikon MONARCH 7i VR Manual De Instrucciones

[Measurement]
Caution — Controls, adjustments or usage of procedures other than those specified herein may
produce negative effects or damage to your health due to laser radiation.
*Before measuring, be sure to confirm each mode setting.
* Please refer to each section on how to set each mode.

■ Adjusting diopter

Adjust the diopter to obtain a clear internal display in the viewfinder.
First, rotate the diopter adjustment ring counterclockwise until it comes to a complete stop.
Next, turn on the power and rotate the diopter adjustment ring back and forth until the internal display
comes into focus.

■ Measuring

1. Turn on the power.
(Automatic power shut-off after approx. 8 seconds
unoperated.)
Immediately after power-on
3. Pressing the PWR button starts measurement.
After measurement, the result is displayed for approx. 8 seconds, then power automatically turns off.
If you press the PWR button during power-on, another measurement starts.
Standby
2. Aim at the target.
Position the target at the center of the
target mark.
En
Es
Fr
Pt
17